Scangrip MAG Rechargeable LED Inspection Work Light 300 Lumen

• Lamp 

• Charger cable

• Manual

Main Light

• Luminous Flux, Max (Lumen): 300

• Luminous Flux, Min (Lumen): 150

• Illuminance, Max (Lux@0,5m): 500

• Illuminance, Min (Lux@0,5m): 250

• Illuminance Distance (Meter): 0.50

• Light Source: 10 x SMD LED

• LED performance (lm/w): 118

• CCT (Kelvin): 6000

• CRI: Ra > 80

• Adjustable Light Output: 2 steps

• Beam Angle Main: 120°

• Beam Distance (Meter): 0

Secondary Light

• Luminous Flux, Max (Lumen): 80

• Illuminance, Max (Lux): 850

• Beam Angle (°): 35

• Beam Distance (Meter): 30

• CRI: >80

• CCT: 6000

• Light Source Secondary: High power LED

• Illuminance Distance (Meter): 0.50

Electrical

• Power source: Rechargeable Battery

• Battery type: Li-Ion

• Battery capacity (mAh): 2200

• Battery voltage (V): 3.70

• Cable: 1 m USB to mini DC

• Charging voltage DC (V): 5.00

• Charging current (A): 1.00

• Charging input voltage (V): 100-240V AC 50/60Hz

• Max Power Consumption (W): 3.50

• Charger included: No

Operation

• Operating time with min. lumen (hours): 5.00

• Charging time (hours): 4.00

• Ingress protection: IP20

• Operating temperature: -10 °C to +40 °C

• Impact resistance (meter): 1.00

• Operating time with max. lumen (hours): 2.50

SHIPPING

A delivery and handling charge applies to all orders with the exception of back-ordered items.

Unless otherwise required by Buyer, Seller will make transport arrangements as follows:

For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods

For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.

Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.

If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. OzSwiss European Tools reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.

DELIVERY TIME

All quoted delivery or consignment dates are estimates only, given without engagement.

Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.

Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer

a) in the event of a delay in consignment or delivery of goods: or

b) in the event of non delivery.

Goods offered ex-stock by Seller are subject to prior sale.

In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.