Kukko 2-Shell Internal Extractor 21-1

For extracting internal bearings, bearing outer rings and bushes

• The powerful design and built-in spindle stop ensure not only strong but also safe work

• Thanks to the extraordinary clamping effect and the mechanical spindle, even bearings that are tightly seated on the rear wall are pulled out safely and quickly

• Shaping ensures a secure grip when mounting and swivelling out bearings or inner rings that form a blind hole

• The thread adapters for internal extractors that may be required are included in the scope of delivery of the counter stays and slide hammers

• Determine the internal diameter of the ball bearing and select a suitable internal extractor

• Insert the internal extractor into the bore and tighten the clamping nut

• If a support surface is available, select a counter stay, otherwise select a slide hammer

Operation with counter stay:

• Support the counter stay on the housing and screw it onto the wedge spindle of the internal extractor

• Hold the handle of the counter stay and pull out the bearing safely by tightening the nut

• Retighten the clamping nut when pulling out

Operation with slide hammer:

• Screw the slide hammer rod onto the wedge spindle of the internal extractor

• Use the slide hammer with a striking motion to pull out the bearing

• Total Height: 96mm

• Width Across Flats: 13mm

• Span inside pull-out (min.): 12mm

• Span inside pull-out (max): 16mm

• Max. tractive force [US t. sh.]: 0.00 tn sh

• Diameter of the extractor: 17mm

• Insert Depth: 25mm

• Country of Origin: Germany

• Material: Tool steel

• Series: 21

• Net Weight: 0.11 kg

SHIPPING

A delivery and handling charge applies to all orders with the exception of back-ordered items.

Unless otherwise required by Buyer, Seller will make transport arrangements as follows:

For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods

For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.

Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.

If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. OzSwiss European Tools reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.

DELIVERY TIME

All quoted delivery or consignment dates are estimates only, given without engagement.

Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.

Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer

a) in the event of a delay in consignment or delivery of goods: or

b) in the event of non delivery.

Goods offered ex-stock by Seller are subject to prior sale.

In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.